Quantifying ground water inputs along the Lower Jordan River

The flow rate of the Lower Jordan River has changed dramatically during the second half of the 20th century. The diversion of its major natural sources reduced its flow rate and led to drying events during the drought years of 2000 and 2001. Under these conditions of low flow rates, the potential influence of external sources on the river discharge and chemical composition became significant. Our measurements show that the concentrations of chloride, calcium, and sodium in the river water decrease along the first 20-km section, while sulfate and magnesium concentrations increase. These variations were addressed by a recent geochemical study, suggesting that ground water inflow plays a major role. To further examine the role of ground water, we applied mass-balance calculations, using detailed flow rate measurements, water samplings, and chemical analyses along the northern (upstream) part of the river. Our flow-rate measurements showed that the river base-flow during 2000 and 2001 was 500 to 1100 L s(-1), which is about 40 times lower than the historical flow rates. Our measurements and calculations indicate that ground water input was 20 to 80% of the river water flow, and 20 to 50% of its solute mass flow. This study independently identifies the composition of possible end-members. These end-members contain high sulfate concentration and have similar chemical characteristics as were found in agricultural drains and in the "saline" Yarmouk River. Future regional development plans that include the river flow rate and chemistry should consider the interactions between the river and its shallow ground water system.     

Mollusc communities in Bulgarian fens: predictive power of the environment,vegetation, and spatial structure in an isolated habitat

Mollusc communities of previously unexplored Bulgarian fens were studied in order to determine and generalise the patterns of species richness and composition along the mineral richness gradient. The aim was also to compare predictive values of the environment, vegetation and spatial structure. Altogether, 44 mollusc species were recorded at 40 treeless fen sites. Species richness varied from 0 to 18 species per site, and it was positively associated with the mineral gradient and negatively with altitude. However, the best predictor was obtained using plant species composition. All explanatory variables had higher effect on land snails than on the entire mollusc assemblage (including aquatic species). Species richness and abundance were significantly and positively correlated with the species composition turnover; the communities were highly nested, with poor sites having subsets of the fauna found in the richest. The main direction of mollusc species turnover was highly associated with that observed for vegetation, and the main gradient of plant species composition was able to explain nearly 20% of total variation in mollusc data. We found that spatial structure explained by far the highest proportion of independent variation, which reflected the high level of geographical isolation of Bulgarian fens and regional differences independent of any environmental variation. Our results demonstrate (1) the general role of mineral richness gradient for structuring mollusc communities in fens, (2) the pivotal indicator role of plant species composition in predicting species composition of mollusc communities, despite being trophically independent and (3) the effect of isolation and origins of the habitat on species composition: most species have wide geographical distributions within the habitat type, and geographical patterns within Bulgaria may have a stochastic element.     

Effect of chronic ozone fumigation on the photosynthetic process of poplar clones showing different sensitivity.

Rooted cuttings from two poplar clones (Populus x euramericana, I-214, and Populus deltoides x maximowiczii, Eridano) were exposed for 15 days to diurnal square-wave treatment with ozone (60 nL L-1 for 5 h day-1). Completely fully expanded leaves exposed to ozone showed a reduction in net CO2 assimilation rate as compared to the control leaves during whole exposure period in both the clones. The reduction was related to a strong stomatal closure in clone I-214, but also to an altered mesophyll activity ascribed to limitation of the dark reactions of photosynthetic process. The results obtained in leaves of I-214 subjected to long-term fumigation seem to support the view that the decrease in quantum yield of electron transport may be a mechanism to down-regulate photosynthetic electron transport so that production of ATP and NADPH would be in equilibrium with the decreased demand in the Calvin cycle. In Eridano the CO2 assimilation was reduced because of the exposure and any alteration in stomatal conductance was observed. Thus, chlorophyll fluorescence parameters showed that an inhibition of photosystem II had occurred (reduction in Fv/Fm ratio), while no alterations in quenching parameters were observed upon illumination. The results seem to indicate that an alternative sink for reducing equivalent, other than carbon metabolism is present.     

Stiff Biodegradable Polylactide Composites with Ultrafine Cellulose Filler

Polylactide (PLA) composites with 10–30 wt% of commercial fine grain filler of native cellulose were prepared by melt-mixing, and examined. The composite films had esthetic appearance, glossy surface, creamy color and density close to that of neat PLA. Good dispersion of the filler in PLA matrix was achieved. The composites were stiffer than neat PLA; in the glassy region the storage modulus increased by approx. 30 %. The tensile strength of the composite materials in the temperature range from 25 to 45 °C was similar to that of neat PLA. No marked decrease in molar mass of PLA in the composites occurred during processing in comparison to neat PLA. Moreover, thermogravimetry experiments demonstrated good thermal stability of the composites; 5 % weight loss occurred well above 300 °C.     

Detection of Listeria monocytogenes in ready-to-eat food by Step One real-time polymerase chain reaction

The aim of this study was to follow contamination of ready-to-eat food with Listeria monocytogenes by using the Step One real time polymerase chain reaction (PCR). We used the PrepSEQ Rapid Spin Sample Preparation Kit for isolation of DNA and MicroSEQ? Listeria monocytogenes Detection Kit for the real-time PCR performance. In 30 samples of ready-to-eat milk and meat products without incubation we detected strains of Listeria monocytogenes in five samples (swabs). Internal positive control (IPC) was positive in all samples. Our results indicated that the real-time PCR assay developed in this study could sensitively detect Listeria monocytogenes in ready-to-eat food without incubation.     

New climate change information modifies frames and decisions of decision makers: an exploratory study in forest planning

Information helps decision makers to address and to decide about environmental problems. In the context of climate change adaptation, often knowledge is missing on how the available information from impact models affects the decision-making process. The main aim of this study was to explore the extent of ambiguity and how new climate change information influenced decision of forest planners. We investigated changes in decisions of planners about forestry actions representing species choice and forest tourism and expiry dates of these actions leading to environmental constraints in the provision of ecosystem services. Forest planners evaluated expiry dates using four forest ecosystem services: forest production, stand yield class, sequestered carbon, and potential tourism. Data were collected during workshops with eleven forest planners from three forest districts in Scotland. Presented climate change information modified the understanding and frames of planners about forestry actions assessed with accompanying expiry dates. Changes in the frames of planners often result in both earlier and later expiry dates. Ambiguity of planners was found to be dependent on diversity in frames and difficulty in evaluating multiple ecosystem services. These findings imply that due to ambiguity forest planners might find it hard to choose climate change adaptation measures and researchers can struggle to convince planners with new research findings.     

Mobility and plant availability of risk elements in soil after long-term application of farmyard manure

Crop rotation long-term field experiments were established in 1955 and 1956 at three locations in the Czech Republic (?áslav, Ivanovice, and Lukavec) differing in their climatic and soil physicochemical properties. The effect of long-term application of farmyard manure and farmyard manure + NPK treatments on plant-available, easily mobilizable, potentially mobilizable, and pseudo-total contents of arsenic (As), cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) contents in soils (in 2013) as well as the uptake of these elements by winter wheat (Triticum aestivum L.) grain and straw were analyzed in the two following seasons: 2012 and 2013. The treatments resulted in increasing the soil pH level when compared to the control, but the cation exchange capacity remained unchanged. Although all fertilizers were applied for six decades, the pseudo-total concentration elements in both the soil and wheat plants stayed far below those of the Czech and European threshold limits for agricultural soils and cereals for human nutrition and feedstuff. Although the mobile pools of As, Cu, and Zn were slightly changed at the treated soils, these changes were not related to the element uptake by the wheat plants. Moreover, the effect of the location and growing season was more decisive for the differences in soil and plant element contents than for the individual treatments. Thus, the long-term application of farmyard manure did not result in any substantial change in risk element contents in both soils and winter wheat plants.     

Biomass of Speckled Alder on an Air-Polluted Mountain Site and its Response to Fertilization

The article summarizes outcomes of a biomass study conducted in a young speckled alder plantation on a cold mountain site. At this location, the previously existing old forest was clear felled because of damage from air pollution, and present-day surface humus is in need of restoration. The intention of this study was to quantify the biomass and nutrients accumulated by alders and their components and assess whether the initial fertilization resulted in increased biomass production and nutrient accumulation in the biomass. Besides the control, two fertilized treatments were installed. In the surface treatment (SUT), the amendment was applied as a base dressing in small circles around trees. In the planting-hole treatment (PHT), the amendment was incorporated into soil inside the planting holes. Five growth seasons after planting and fertilization, six alders from each treatment were harvested including roots. Their biomass was quantified and analyzed for macroelements. The greatest pool of dry mass (DM) was branches in the control and stem wood in the fertilized treatments. The greatest pools of macroelements were leaves and branches. The most pronounced effects of fertilization were recorded in the DM and consequently in the absolute quantities of nutrients. The DM of an average tree in the control, SUT, and PHT was 85, 226, and 231 g, respectively. The absolute contents of nutrients per tree in the fertilized treatments showed the following increases, as compared with the control: (N) 2.5–2.6 times; (P) 1.6–2.4 times; (K) 1.8–2.1 times; and (Mg) 1.8–2.0 times, respectively. Speckled alder responded positively to fertilization.     

Quantification of carbon dioxide and methane emissions in urban areas: source apportionment based on atmospheric observations

Anthropogenic emissions of carbon dioxide (CO₂) and methane (CH₄) in the atmosphere constitute an important component of the related carbon budget. The main source of anthropogenic CO₂ is burning of fossil fuels, especially in densely populated areas. Similar emissions of CH₄ are associated with the agricultural sector, coal mining, and other human activities, such as waste management and storage and natural gas networks supplying methane to large urban, industrial centers. We discuss several methods aimed at characterizing and quantifying atmospheric loads and fluxes of CO₂ and CH₄ in Krakow, the second largest city in Poland. The methods are based on atmospheric observations of mixing ratios as well as isotopic composition of the investigated gases. Atmospheric mixing ratios of CO₂ and CH₄ were measured using gas chromatography (GC) and cavity ring-down spectroscopy (CRDS). The isotopic composition of CO₂ and CH₄ was analyzed using isotope ratio mass spectrometry (IRMS), accelerator mass spectrometry (AMS), and CRDS techniques. These data, combined with auxiliary information characterizing the intensity of vertical mixing in the lower atmosphere (height of the nocturnal boundary layer [NBL] and atmospheric ²²²Rn concentration), were further used to quantify emission rates of CO₂ and CH₄ in the urban atmosphere of Krakow. These methods provide an efficient way of quantifying surface emissions of major greenhouse gases originating from distributed sources, thus complementing the widely used bottom-up methodology based on emission statistics.

     

Dynamics of dust explosions suppression by means of extinguishing powder in various industrial conditions

In industrial conditions, there are different kinds of installations endangered by an explosion of dust–gas mixtures. In order to prevent them from any consequences of potential explosions, active protection systems which use extinguishing powders, as the suppressing material, are more and more widely applied. It often happens that the industrial installations are additionally endangered by an action of mechanical vibrations. In the above-mentioned conditions, the extinguishing powder tends to aggregate, making the process of dispersing it in the protected areas more difficult.

The results of research into optimization of the shape, number of igniters and miniaturization of the explosive charge mass are presented. In case of occurrence of the mechanical vibrations in the installations that cause aggregation of the suppressing powder, the best solution was modification of the perforated combustion chamber located inside the extinguisher. As a result of that, a certain amount of gases generated in the course of combustion of the main charge is directed over the membrane, where the gases crash a layer of aggregated powder. Thus, the process of pushing the powder out from a container towards the dispersing head improves considerably and consequently increases the efficiency of the explosion-suppressing process.